Applications & Technical Support
PCE behaviour changes with cement type, aggregate, curing method and climate. Pick your application and see how we match a grade to it — or send us your mix design and we will do it for you.
Where Our PCE Performs
Six application areas, each with its own technical constraints and its own recommended grade.
Ready-Mix Concrete
Slump retention that holds from the batching plant to the point of discharge, matched to your local cement and supplementary materials.
Learn morePrecast Concrete
Fast strength development for steam curing and quick demoulding cycles, with surface finish quality that meets architectural standards.
Learn moreUHPC & High-Strength Concrete
Achieve 150 MPa and above with an ultra-low water-cement ratio, using PCE grades engineered for high binder content and silica fume systems.
Learn moreDry-Mix Mortar & Tile Adhesive
Powder PCE with excellent redispersibility for tile adhesive, repair mortar and render — improving bond strength, open time and workability.
Learn moreSelf-Leveling & Grout
High-flow PCE grades with low bleeding for self-leveling compounds, non-shrink grout and precision grouting applications.
Learn moreRefractory Castable
PCE dispersants for low-cement refractory castables — better flow and placement without sacrificing hot strength.
Learn moreWe Match Materials, Not Just Specifications
A grade that performs in one plant can fail in another. The difference is usually the raw materials, not the additive.
We ask for your mix design first
Cement type, binder content, aggregate water absorption and target performance tell us more than any product specification sheet.
We supply a sample, not just a quote
You verify performance against your own materials before committing to a bulk order. That is the only test that matters.
We develop custom formulations where needed
If nothing in our standard range fits, our R&D team formulates to your materials and climate under our ODM service.
We support you after the order
Technical support by email, WhatsApp or video call at no extra cost, for as long as you are using our product.
We visit for bulk customers
For regular volume customers we can send an engineer to your plant to assist with trial production and dosage optimization.
We tell you when you do not need us
If your current dosage is already optimal, we will say so rather than sell you an upgrade you do not need.
Tell us your mix design — we will tell you the grade
Send your cement type, mix design and target performance. Our technical team replies within 12 working hours with a grade recommendation, starting dosage and a free sample offer.