Industrial Dispersants & Surfactants
Anionic polymer dispersants and wetting agents for coatings, pigment slurries and mineral fillers. Reduce viscosity, raise filler loading and keep pigment particles stable against re-agglomeration.
Dispersant performance shows up in places that are easy to overlook until something fails: the viscosity that creeps up when you raise filler loading, the pigment that flocculates after a few days in storage, or the foam that will not break in a limestone hydration system.
Our dispersants are built on the same polymer chemistry platform as our PCE range, adapted for non-cementitious systems. Low-foam grades are available where foam generation is a practical problem in production.
These products are supplied as liquid concentrates for easy dosing into existing production lines.
Typical Specifications
Values are typical and not a specification. Request the latest TDS for guaranteed figures.
Available Grades
Each grade is developed around a different balance of water reduction, slump retention and setting behaviour. Tell us your application and we will recommend the right one — or test samples if you are unsure.
Low-foam anionic surfactant designed for coating systems and limestone hydration processes where conventional dispersants generate persistent foam. Reduces viscosity without destabilising the system.
| Ionic Nature | Anionic |
|---|---|
| Key Feature | Low foam generation |
| Best For | Coatings, limestone hydration |
Anionic polymer wetting agent for titanium dioxide and other inorganic pigments. Improves wetting and dispersion, raising pigment loading while maintaining stable slurry viscosity.
| Ionic Nature | Anionic |
|---|---|
| Key Feature | Improves wetting and loading |
| Best For | TiO₂ pigment, inorganic filler slurries |
Suitable Applications
Ordering Information
| MOQ (liquid) | 1 tonne (or 25 kg trial pack) |
|---|---|
| MOQ (powder) | 500 kg (or 25 kg trial pack) |
| Free sample | 1 kg liquid / 500 g powder, courier cost only |
| Sample lead time | 3–5 working days |
| Order lead time | 7–15 working days after deposit |
| Payment terms | 30% T/T deposit, 70% against B/L copy; or irrevocable L/C at sight |
| Shipping terms | FOB / CIF / DDP — your choice |
| Packaging — liquid | 200 L drums, 1,000 L IBC tanks, or 20 ft flexitank |
| Packaging — powder | 25 kg PP/PE bags with inner liner, or 500 kg jumbo bags |
Questions About Dispersants?
They are anionic polymer dispersants and are compatible with the majority of acrylic, styrene-acrylic and mineral binder systems. For specific systems, request a sample and run a compatibility check in your own formulation.
Start at 0.3% – 1.0% on pigment or filler weight and adjust based on viscosity response. Our technical team can advise on a specific starting point if you share your formulation and current dispersion process.
Yes. We supply laboratory samples free of charge, with you covering only the international courier cost. Sample charges are deducted from your first commercial order.
Tell Us What You Need
Our technical sales team replies within 12 working hours with a quotation, technical data sheet and a dosage recommendation for your application.
Want to test Dispersants with your own materials?
We ship a free sample within 3 working days so you can verify performance against your own cement, aggregate and mix design before committing to a bulk order.